Basic Info.
Machine Color
Grey or Blue
Machine Gas
LPG and Oxygen
Machine Power Supply
25kw
Capacity
1200PCS Per Hour
Color Temperature
Warm White
Lamp Body Material
Aluminum
Transport Package
Wooden Packing
Specification
2.7x2.7x1.7
Product Description
Shanghai Tychen Co.Ltd has been in lamp and lights making machinery for more than 30 years. Now our led filament bulb making machines are the best machines from china, all of china big factories like China Phlips are all using our led filament bulb making machines.
We have filament auto assembling machine as following performances and technical points:
This machine is designed to fix driver to bulb, 16 station, double stations intermittent transmission mechanism, with output of about 1200-1300 pieces / hour. Automatic loading drive, automatic positioning, automatic loading sealed bulb, automatic wires trimming, automatic winding, automatic gluing, automatic loading lamp head, lighting measurement, then auto unloading.
9.1).Main technical parameters:
Power supply and gas are used. Servo motor and electrical PLC are used for control.Safety voltage of active valve is 24V, main motor is 380V, and high-pressure wind is 0.5-0.8mpa.
Production capacity: 1200-1300 pieces / hour
Overall dimension: 5100mm * 3200mm * 2100mm
Equipment weight 1800kg
Number of operators: 1-2
Equipment qualification rate > one-time qualification rate of machine is more than 96%, and drive scrap rate ≤ 1%
9.1.2), Machine electric appliance is controlled by PLC, the pneumatic valve adopts safety voltage of 24V, and adopts servo motor.
9.1.3), gas requirements: high pressure wind 0.5 ~ 0.8MPa.
9.1.4), qualification rate requirements: one-time qualification rate of the machine is more than 96% after driver and sealed bulb be tested qualified, and the driver rejection rate is ≤ 1%. Defective products can be used after manual repair
9.2) ,Machine actions include:
1. Manually divide lead-in-wire of the sealed bulb and put driver to the chain transmission station.
2. Detection the driver and positioning the driver
3. Automatically loading sealed bulb.
4. Automatically divide driver 's positive and negative poles.
5. sealed bulb and drivers wires be positioned
6. Automatic put on sleeve (optional)
7. Pull out the negative sleeve
8. Driver positioning, one side wires of two drivers be wounded at the same time
9. At the same time, wind the wires on the other side;
10. Winding process as following:
10.1), sealed bulb and the driver arrive at the designated winding station at the same time, and then wind one side first;
10.2), then they are run to the next station for winding on the other sides;
10.3), light up test after winding.
11. Automatically apply heat-transfer glue after winding the wire; (optional)
12. The test lights up after winding;
13. Automatic fix lamp caps(E27 or B22);
14. Automatic feeding to conveyor belt: good and bad products are separated and automatically fed to conveyor belt
We are making the best led filament bulb machines in china, such as sealing and exhausting machine, fully automatic assembling machine, automatic welding machine, capping machine and so on.
We could do turn key project for any lamps or lights manufacturing, and also we supply single machines or equipment for making lights and lamps .
We are making fully automatic LED filament bulb making machines and equipment, such as sealing and exhausting machine
LED filament bulb is a bulb which will certainly replace any bulbs such as normal led bulbs and CFL and halogen bulbs, since its costing is lower and lumen is much higher than normal led bulbs.
Our LED filament bulb machines including sealing and exhausting machines, capping machines, cement making machines and cement fixing machines and so on.
Our machines cost lower , but efficency is very high compaired with other machines.
Welcome you visit our factory and if you want to set up led lights or led sealing factory, please do not hesitate to contact us.
Address:
Room 3-2603, No.1000, Pudong Ave. Pudong New Stricts , Shanghai
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Lights & Lighting, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, QC 080000
Company Introduction:
Shanghai Tychen Electronic Technology is professional manufacturer of bulb making spare parts and also LED A bulb and LED T bulb CKD SKD spare parts for more than 30 years.
We are making LED A bulbs and LED T bulbs CKD and SKD with most reasonable prices and reliable quality.
For LED A bulb and T bulbs, We can design your special needs in LED chips board for being longer your bulb life time and higher real wattage from the market.
With LED filaments bulbs becoming more and more popular, we are also making LED filaments spare parts such as:
1, bulbs filaments
2, drivers.
3, All kinds of glass shells such as A60 shells, A75 shells, A55 shells, P45 shells, C35 glass shells and so on.
And also LED Filaments bulb making machines, such as LED glass bulb making machines, auto mounting and auto sealing and auto assembling to capping and aging machines are being made in our brother factory.
Products quality controlling is the most important in our business, we adopt strict quality controlling system during our products are being produced to ensure all our products are qualified before being shipped.
Our company faith is gain and grow with our customers, no matter you are from where, if you are interested in making bulbs and lamps, please contact us.